2gigALARM_LOGOCrash & Smash Protection

Interactive Security Solution offers the only security system with patented technology to protect against criminals disabling vulnerable security systems by destroying the panel before it can send an alarm signal. Eliminate any doubt and make sure you are protected when you need it most.

When you open the door with a traditional alarm, it gives you time to to enter your code and turn the alarm off. If you don’t enter the code in time the siren will go off. Then the system will send a signal to the monitoring center. With Smash & Crash technology a signal is sent when the door is open. The monitoring center is then waiting for the disarm signal. If the disarm signal is not received, that is alarm. The proper alarm response would then be taken.


We use Alarm.com for a higher level of security

Alarm.com uses exclusive technology, which detects system tampering or destruction during:

  • Entry delay
  • Alarm dialing process
  • Dialer delay

First-class protection

Because Alarm.com monitors all sensor activity, they know when someone enters the property. When the system is armed it understands there should either be an armed or disarmed command sent. If the panel is destroyed and is no longer communicating, it does not get the appropriate response signal and will send a notification from its Network Operations Center to emergency personnel.

Reduce false alarms

Another benefit of advanced technology from Alarm.com is the ability to reduce the number of false alarms. Now, you can worry less about unnecessary trips from the police or fire department and avoid potential fines.